FlashSwap™
Next-Gen FDM Printing, Powered by Interchangeable Multi-Nozzles and Smart Workflow.
Why Choose Creator 5?
Multi-Colour Printing up to 500% Faster
Zero Purge Waste During Material Switching
Near-Zero Waste. Maximum Output.
Features
Fully Automatic Multi-Toolhead Offset Calibration
Flawless Surfaces, Enabled by Auto-Compensation
Versatile Solutions for Every Creator
Makers
|
Families
|
Education
|
3D Print Farm
|
Technical details
Specifications
| FlashForge Creator 5 | |||
|---|---|---|---|
| Extruder Quantity | 4 Independent Toolheads | Max. Bed Temperature | Max. 120 °C |
| Build Volume | 256 × 256 × 256 mm | Build Plate | PEI Flexible Steel Build Plate (Textured) |
| Layer Thickness | 0.1 – 0.4 mm | Auto Leveling | ✓ Automatic |
| Maximum Flow Rate | 32 mm³/s | Max. Extruder Temperature | 320 °C |
| Nozzle Diameter | 0.4 mm standard 0.25 mm / 0.6 mm / 0.8 mm |
Removable Nozzle | ✓ |
| Display | 4-inch 800 × 480 full-colour touchscreen | Dynamic Flow Calibration | ✓ Auto PA Calibration |
| Recommended Filaments | PLA, PETG, TPU-90A (top external mount), TPU-95A, TPU-64D, PLA-CF, PETG-CF, SILK, PVA, BVOH | Filament Detection | ✓ Run-out Sensor |
| Supported Filaments with Enclosure | ABS, ASA, HIPS, ABS-GF, PA-CF, ASA-CF, ASA-GF, S-Multi, S-PAHT, PET-CF, PAHT-CF, PPA-CF, PPS-CF | Power Outage Recovery | ✓ |
| Travel Speed | Max. 600 mm/s | Chamber Lighting | ✓ |
| Print Speed | Max. 300 mm/s | Remote Monitoring | Built-in HD camera, 1280 × 720 at 30 fps |
| Acceleration | Max. 30,000 mm/s² | Multi-Printer Management | ✓ |
| Connectivity | USB / Wi-Fi | Wi-Fi | 2.4 GHz / 5 GHz Wi-Fi |
| Compatible Slicing Software | Flashforge Studio | One-Touch Power On/Off | ✓ |
| Printer Size | 520 × 443 × 710 mm (including filament tube and holders) 436 × 432 × 480 mm (without filament tube and holders) |
Weight | Net: 14 kg Gross: 18 kg |
| Input | 100–120V / 200–240V AC, 50/60Hz 700W |
Structure | Open Frame Design |
Included in the box
Packing List
Need to know more?
Frequently Asked Questions
When is print head offset calibration required, and how long does it take?
Print head offset calibration is required in the following situations:
- Initial printer setup
- Hotend replacement
- Nozzle scraping against the heat bed, components, or models
- Offset issues during multi-color or multi-material printing
The complete calibration process typically takes around 15–20 minutes.
What is the noise level of the Creator 5 series during operation?
The Creator 5 series offers three printing modes. In Silent Mode, noise can be controlled below 55 dB.
Does the Creator 5 series support 5 GHz Wi-Fi?
Yes. The Creator 5 series supports both 2.4 GHz and 5 GHz Wi-Fi networks.
What intelligent detection features does the Creator 5 series have?
Creator 5 includes filament run-out and tangle detection. Creator 5 Pro adds door-open detection and chamber-temperature monitoring for additional safety and print stability.
Reviews
There are no reviews yet.